Home > Semi-Submersible Pumps
Description

CHARACTERISTICS:

  • FLOW RATE from 0,1 up to 300 (m3/h)
  • PRESSURE up to 48 (bar)
ADVANTAGIES:

  • pumping of media with solid contents
  • pumping of media low to high viscosity
  • continuous, gentle and low-pulsation flow
  • precise dosing
  • flow in proportion to speed
  • more...
ADDITIONAL OPTIONS:

  • open hopper
  • feeder
  • explosion protection
  • clean-in-place
  • mobile platform
  • more...
APPLICATION:

  • oil and gas
  • slurry and sludge
  • cosmetics, creams and lotions
  • paint, varnish and adhesives
  • fruits and vegetables
  • more...
INDUSTRIES:

  • oil and gas industry
  • waste and sludge treatment industry
  • food and beverage industry
  • paper making industry
  • biogas industry
  • more...

TECHNICAL DATA

BV_L01 PUMP TYPE 6 (bar) 0,1 - 300 (m3/h)DATADRAWINGOPEN

BV_S01 PUMP TYPE 6 (bar) 0,5 - 200 (m3/h)DATADRAWINGOPEN

BV_S02 PUMP TYPE 12 (bar) 0,1 - 180 (m3/h)DATADRAWINGOPEN

BV_S03 PUMP TYPE 18 (bar) 3 - 80 (m3/h)DATADRAWINGOPEN

BV_S04 PUMP TYPE 24 (bar) 0,1 - 140 (m3/h)DATADRAWINGOPEN

BV_S06 PUMP TYPE 36 (bar) 2 - 140 (m3/h)DATADRAWINGOPEN

BV_S08 PUMP TYPE 48 (bar) 0,1 - 140 (m3/h)DATADRAWINGOPEN

DESIGN
1
Cartridge sleeve
2
Stator
3
Pump Housing
4
Suction Flange
5
Rotor
6
Coupling Rod Pin
7
Guide Bush
8
Holding Band
9
Boot Seal
10
Coupling Rod
11
Coupling Rod Bush
12
Retaining Sleeve
13
Shaft PinRetaining Sleeve
14
Plug-in Shaft
15
Shaft Pin
16
Sealing Plate
17
Retaining Ring
18
Lantern
19
Gear
20
Drive



DESIGNATION
BV 031 S02 H YY X
SERIES
BV - semi-submersible pumps
BN - horizontal pumps
BM - dosing metering pumps
BT - barrel drum pumps
MODEL
This parameter defines the diameter and the pitch of the rotor
and determines potential flow rate of the pump
TYPE
L01 - pressure up to 6 (bar)
S01 - pressure up to 6 (bar)
S02 - pressure up to 12 (bar)
S03 - pressure up to 18 (bar)
S04 - pressure up to 24 (bar)
S06 - pressure up to 36 (bar)
S08 - pressure up to 48 (bar)
MATERIAL
H - carbon steel
F - stainless steel AISI 321
C - stainless steel AISI 316
DRIVE SHAFT SEALING
Z - stuffing box
Y - single mechanical seal
YY - double mechanical seal
OPTIONS & ACCESSORIES
B - open hopper
S - feeding screw
C - clean-in-place
X - explosion protection
M - mobile platform
V - speed variator
N - frequency inverter



OPERATION

SOLTEC Progressive Cavity Pumps is a type of positive displacement pumps that employs an assembly of a single-helical steel rotor and a double-helical resilient stator. Eccentric rotation of the rotor inside the stator forms fixed-size sealed cavities that move along the assembly creating pressure.

The diameter and the eccentricity of the rotor are responsible for the capacity of the pump when the pitch of the rotor is responsible for potential pressure. Usually one pitch of the rotor can develop pressure up to 6 bar. SOLTEC manufactures rotors and stators up to 8 pitches which develop pressure up to 48 bar.



APPLICATION
OIL & GAS INDUSTRY
  • from light to heavy crude oil
  • fluids with a gas yield
  • drilling fluids and mud
  • diesel oil transfer
  • and more...
FOOD & PHARMACEUTICAL INDUSTRY
  • milk and dairy
  • wine processing
  • sauces and creams
  • fish slurry
  • and more...
MINING & EXPLOSIVES INDUSTRY
  • mine dewatering
  • explosives insulation
  • drilling fluids and mud
  • reagent dosing
  • and more...
WASTEWATER & BIOGAS INDUSTRY
  • primary sludge
  • chemical dosing
  • bilge water
  • biomass
  • and more...
PAINTS & COATING INDUSTRY
  • ink and glues
  • kaolin clay
  • adhesives
  • latex
  • and more...
PULP & PAPER INDUSTRY
  • solvents
  • chemicals
  • oils
  • acids
  • and more...





CONTACT US
SOLTEC NMZ, LLC
Headquarters
 1 Politruka Zhurkina St 1
     Dnipro, Ukraine 49000
 
V.E.P. Baumaschinen GmbH
Official Representative
 23 Fedor-Schnorr-Str
     Plauen, Germany 08523
 info@vep-baumaschinen.de