Home > Our Projects > SOLTEC ® BN090S03FZ screw pump for pulp baking with mechanical impurities
PROBLEM:
A large company that produces metals needed a pulp pump with mechanical impurities. According to the technical specifications, the pulp is fed to a filter press. Pump capacity 30 m3 and pressure 18 bar.
SOLUTION:
To accomplish this task, SOLTEC® specialists selected and manufactured a horizontal single screw pump BN090S03FZ. To ensure stable operation on media with abrasive content, a stuffing box seal is used.
Technical details of screw pump BN090S03FZ:
- Pump Type - Horizontal Single Screw
- Material of a flowing part - Steel 12X18H10T
- Rotor Material - Steel 12X18H10T
- Stator material (ferrule) - IRP-1294
- Productivity - 30 m3/hour
- Outlet pressure - up to 18 bar
- Drive shaft speed - 232 rpm
- Input / output: flange DN150
- Engine power - 30 kW
- Drive Shaft Seal Type - Service Packing
- The pump is equipped with a VARMEC gearbox
Lead Project Manager

- Kovtun Alexey
+7 920 553 53 86
mn5@soltecpumps.com
https://www.soltecpumps.com
CONTACT US
SOLTEC NMZ, LLC
Headquarters
Dnipro, Ukraine 49000
V.E.P. Baumaschinen GmbH
Official Representative
Plauen, Germany 08523
BAL-TRANS sp. zo. o.
Official Representative
80-755 Gdańsk, Polska
SOLTEC NMZ, LLC
Official Representative
Belgorod, Russia 308006
Belteplomashstroy, CJSC
Official Representative
Minsk, Belarus, 220015
Inzheprom, LLC
Official Representative
Minsk, Belarus, 240014
SOLTEC Kazakhstan, LLP
Official Representative
Almaty, Kazakhstan, 050046
DWM TECHNICAL SERVICES LTD
Official Representative
Israel, 3903215
Kotan Bau Yapı San. Ve Tic. A.Ş.
Official Representative
İstanbul/TÜRKİYE
LEKONA, LLC
General Distributor of construction screw pairs
Russia, 140128
TRACS BV
Official Representative & Service Centre of mortar pumps
Antwerpen, Belgium