Home > Our Projects > SOLTEC ® BV045L01FY single-screw semi-Immersible pump for acidic waste pumping
PROBLEM: Supply of sewage with traces of acid solutions from buried tanks for cleaning. The customer requested to select a screw pump for installation on a recessed tank with the following parameters: capacity ranging from 8 to 10 m3/h and operating pressure up to 2 bar.
SOLUTION: As part of this task, the SOLTEC® specialists selected and manufactured a vertical single-screw pump BV045L01FY with a capacity of 9 m3/h and a working pressure of 2 bar.
Technical details of the screw pump BV045L01FY:
- Pump Type - Vertical Single Screw Pump
- The material of the flow part - steel 12X18H10T
- Screw material (rotor) - steel 12X18H10T
- Clip material (stator) - acid resistant HVA9284
- Maximum outlet pressure - 2 bar
- Productivity - 9 m3/h
- Type of drive shaft seal - single face
- Common Industrial Engine - IP55, U2
- Immersion length - 1.2 m
CONTACT US
SOLTEC NMZ, LLC
Headquarters
Dnipro, Ukraine 49000
V.E.P. Baumaschinen GmbH
Official Representative
Plauen, Germany 08523
BAL-TRANS sp. zo. o.
Official Representative
80-755 Gdańsk, Polska
SOLTEC NMZ, LLC
Official Representative
Belgorod, Russia 308006
Belteplomashstroy, CJSC
Official Representative
Minsk, Belarus, 220015
Inzheprom, LLC
Official Representative
Minsk, Belarus, 240014
SOLTEC Kazakhstan, LLP
Official Representative
Almaty, Kazakhstan, 050046
DWM TECHNICAL SERVICES LTD
Official Representative
Israel, 3903215
Kotan Bau Yapı San. Ve Tic. A.Ş.
Official Representative
İstanbul/TÜRKİYE
LEKONA, LLC
General Distributor of construction screw pairs
Russia, 140128
TRACS BV
Official Representative & Service Centre of mortar pumps
Antwerpen, Belgium