PROGRESSIVE CAVITY PUMPS

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

Home > Our Projects > Pump unit for dosing of fuel oil
Gallery

The pump unit SOLTEC ® BN011S02FYV has been made under request of the Company that produces high-tech equipment for heat treatment of metals and other construction materials.

This pump is designed for dosing of fuel oil.

Pump output capacity is regulated by a variator in a range of 5 - 60 l / h.

The maximum permissible fluid temperature is 95 ° C.

Operating pressure at the outlet of the pump unit is up to 4 bar.

The inlet and outlet of the pump have pipe connections with internal thread ½ ".

All working parts of the pump that come into contact with the pumped liquid are made of stainless steel 12X18H10T.

The stator of the pump unit is made of oil-resistant elastomer.

Motor power 0.37 kW, mains of 380 V.

Reducer and a mechanical variator manufactured by VARMEC (Italy).