Home > OPEN HOPPER PUMPS
Description

ADVANTAGES:

  • flow rate from 0,1 up to 300 (m3/h)
  • pressure up to 48 (bar)
  • gentle conveyance
  • constant low-pulsation conveyance
  • high efficiency

TECHNICAL DATA

BN_L01 PUMP TYPE 6 (bar) 0,1 - 300 (m3/h)DATADRAWINGOPEN

BN_S01 PUMP TYPE 6 (bar) 0,5 - 200 (m3/h)DATADRAWINGOPEN

BN_S02 PUMP TYPE 12 (bar) 0,1 - 180 (m3/h)DATADRAWINGOPEN

BN_S03 PUMP TYPE 18 (bar) 3 - 80 (m3/h)DATADRAWINGOPEN

BN_S04 PUMP TYPE 24 (bar) 0,1 - 140 (m3/h)DATADRAWINGOPEN

BN_S06 PUMP TYPE 36 (bar) 2 - 140 (m3/h)DATADRAWINGOPEN

BN_S08 PUMP TYPE 48 (bar) 0,1 - 140 (m3/h)DATADRAWINGOPEN

DESIGN
1
Discharge Flange
2
Thru-Bolt
3
Stator
4
Pump Housing
5
Suction Flange
6
Rotor
7
Holding Band
8
Boot Seal
9
Guide Bush
10
Coupling Rod Pin
11
Coupling Rod Bush
12
Coupling Rod
13
Retaining Sleeve
14
Plug-in Shaft
15
Shaft Pin
16
Shaft Sealing
17
Sealing Plate
18
Retaining Ring
19
Lantern
20
Gear
21
Drive
22
Support
23
Pump Base



DESIGNATION
BN 031 S02 H YY X
SERIES
BN - horizontal pumps
BV - semi-submersible pumps
BM - dosing metering pumps
BT - barrel drum pumps
MODEL
This parameter defines the diameter and the pitch of the rotor
and determines potential flow rate of the pump
TYPE
L01 - pressure up to 6 (bar)
S01 - pressure up to 6 (bar)
S02 - pressure up to 12 (bar)
S03 - pressure up to 18 (bar)
S04 - pressure up to 24 (bar)
S06 - pressure up to 36 (bar)
S08 - pressure up to 48 (bar)
MATERIAL
H - carbon steel
F - stainless steel AISI 321
C - stainless steel AISI 316
DRIVE SHAFT SEALING
Z - stuffing box
Y - single mechanical seal
YY - double mechanical seal
OPTIONS & ACCESSORIES
B - open hopper
S - feeding screw
C - clean-in-place
X - explosion protection
M - mobile platform
V - speed variator
N - frequency inverter



OPERATION

SOLTEC Progressive Cavity Pumps is a type of positive displacement pumps that employs an assembly of a single-helical steel rotor and a double-helical resilient stator. Eccentric rotation of the rotor inside the stator forms fixed-size sealed cavities that move along the assembly creating pressure.

The diameter and the eccentricity of the rotor are responsible for the capacity of the pump when the pitch of the rotor is responsible for potential pressure. Usually one pitch of the rotor can develop pressure up to 6 bar. SOLTEC manufactures rotors and stators up to 8 pitches which develop pressure up to 48 bar.



APPLICATION
OIL & GAS INDUSTRY
  • from light to heavy crude oil
  • fluids with a gas yield
  • drilling fluids and mud
  • diesel oil transfer
  • and more...
FOOD & PHARMACEUTICAL INDUSTRY
  • milk and dairy
  • wine processing
  • sauces and creams
  • fish slurry
  • and more...
MINING & EXPLOSIVES INDUSTRY
  • mine dewatering
  • explosives insulation
  • drilling fluids and mud
  • reagent dosing
  • and more...
WASTEWATER & BIOGAS INDUSTRY
  • primary sludge
  • chemical dosing
  • bilge water
  • biomass
  • and more...
PAINTS & COATING INDUSTRY
  • ink and glues
  • kaolin clay
  • adhesives
  • latex
  • and more...
PULP & PAPER INDUSTRY
  • solvents
  • chemicals
  • oils
  • acids
  • and more...




CONTACTS
  USA
BATURIN, INC
300 Spectrum Center Drive #400, Irvine, CA 92618
Headquarters
EUROPE
Lublin
BATURIN Poland
Official representative
Plauen
V.E.P. Baumaschinen GmbH
Official representative
Antwerp
TRACS BV
Official representative
ASIA
Nur-Sultan city
"SOLTEK NMZ", TOO
Official representative
MIDDLE EAST
Tirat Carmel
DWM TECHNICAL SERVICES LTD
Official representative
AFRICA
Cape Coast
Official representative
Chingola
Official representative
Lusaka
Official representative
Scottville
Official representative