PROGRESSIVE CAVITY PUMPS

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

Home > Our Projects > Machine for pumping gas condensate on the deposit
Gallery

Machine for pumping gas condensate on the deposit

SOLTEC ® company Novomoskovsk Mechanical Plant for PJSC (Public Joint Stock Company) Ukrgazdobucha in the branch of gas industrial administration Poltavagazdobucha produced, assembled and put the pumps into operation on the area in the village Mashevka. The pumps transfer formation water and gas condensate. BN045S04HYX pumps with capacity - 4 m3/h and outlet pressure - up to 24 bar were installed for pumping the formation water.

These pumps are equipped with explosion proof drives. The inlet pressure in technological cycle is 16 bar. The solution was to install special, hydraulic discharged face seals equipped with a hydrocyclone. BN063S04HYX pumps with capacity - 4 m3/h and outlet pressure - up to 24 bar were installed for pumping gas condensate. These pumps are also equipped with explosion proof drives.