Home > OUR PROJECTS > Single-screw pumping unit SOLTEC ® BM008S03FYV for pumping an Al2O3-based ceramic water suspension

progressive cavity pumps soltec foto 2 progressive cavity pumps soltec foto 1 progressive cavity pumps soltec foto 3 progressive cavity pumps soltec foto 4 progressive cavity pumps soltec foto 5 progressive cavity pumps soltec foto 6

TASK: Before the customer, one of the manufacturers of industrial equipment, there was the task of dosing an aqueous suspension of ceramics based on Al2O3.

SOLUTION: To solve this problem, the SOLTEC ® specialists selected the screw pump unit SOLTEC ® BM008S03FYV.

Main characteristics of the screw pump BM008S03FYV unit:

  • Pump type - horizontal single screw pump.
  • The material of the flow part of the pump is steel 12X18N10T.
  • The pressure at the outlet of the pump is 6 bar.
  • Varmec (Italy) variator allows you to adjust the speed of rotation of the pump screw in the range of 200 - 1000 rpm.
  • Pump capacity control range is 10 to 50 l/h.
  • Seal type of pump drive shaft - single mechanical seal.
  • Electric motor characteristics - 0.55 kW, 380 V, 1500 rpm.
CONTACTS
  USA
BATURIN, INC
300 Spectrum Center Drive #400, Irvine, CA 92618
Headquarters
EUROPE
Lublin
BATURIN Poland
Official representative
Plauen
V.E.P. Baumaschinen GmbH
Official representative
Antwerp
TRACS BV
Official representative
ASIA
Nur-Sultan city
"SOLTEK NMZ", TOO
Official representative
MIDDLE EAST
Tirat Carmel
DWM TECHNICAL SERVICES LTD
Official representative
AFRICA
Cape Coast
Official representative
Chingola
Official representative
Lusaka
Official representative
Scottville
Official representative