PROGRESSIVE CAVITY PUMPS

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

Home > Our Projects > Single-screw progressing cavity pump unit SOLTEC ® BV105S02HYYX for conveying of oil-water emulsion
Gallery

OBJECTIVE: One of the largest vertically integrated oil and gas companies in the world, gave a technical task regarding pumping of oil-water emulsion from drainage tank EP 40-2400. The Customer asked for the flow head 120 meters with capacity 50 m3/hour.

SOLUTION: The specified problem has been solved by using of single-screw pump units SOLTEC ® BV105S02HYYX which were designed, manufactured and delivered to the Customer oil production facility.
Mentioned pumps are specially designed for installation at EP 40-2400 drainage tank with using an electric motor with a power of 37 kW and a reducer of the Slovak company STROINA.
The gerotor pump is able to develop a pressure of up to 12 bar with nominal capacity 50 m3/hour.

 

The main characteristics of the screw pump unit BV105S02HYYX:

  • Pump type - vertical single-screw PC pump
  • Material of the flowing part - carbon steel
  • The maximum outlet pressure - 12 bar
  • Capacity - 50 m3/hour
  • Seal type of drive shaft - double mechanical seal with flushing
  • Installed power - 37 kW