CLEAN ENERGY

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

WATER TREATMENT

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

AGRICULTURE

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

FOOD INDUSTRY

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

CONSTRUCTION

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

HEALTHCARE

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

OIL & GAS

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

MINING

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

Home > OUR PROJECTS > Single screw progressing cavity pump unit SOLTEC ® BV045S06HYX for conveying of crude oil from underground tanks
Галерея

TASK: Conveying of crude oil from underground tanks for further processing. The customer asked to design a screw pump that would be able to feed the crude oil with capacity 9 m3/h and operating pressure up to 36 bar.

SOLUTION: Within the framework of this task, specialists of SOLTEC ® have designed and manufactured a vertical single-screw pump BV045S06HYX with a capacity of 9 m3/h and working pressure up to 36 bar.

The main characteristics of the screw pump unit BV045S06HYX

  • Pump type - vertical single-screw pump
  • The material of the flowing part is steel 09Г2С with a protective coating
  • The material of the screw (rotor) is 12Х18Н10Т stainless steel
  • The material of the stator is oil resistant rubber NBR
  • Maximum outlet pressure - up to 36 barCapacity - 9 m3/h
  • Seal type of the drive shaft - single mechanical with additional protection
  • Engine in explosion-proof design - 1ExdIIBT4
  • The pump is equipped with supporting flange DN800
  • The length of the submerged part is 4 m