Home > UNSERE PROJEKTE > SOLTEC ® BN090S03FZ screw pump for pulp baking with mechanical impurities

progressive cavity pumps soltec foto 2 progressive cavity pumps soltec foto 1 progressive cavity pumps soltec foto 3 progressive cavity pumps soltec foto 4 progressive cavity pumps soltec foto 5 progressive cavity pumps soltec foto 6 progressive cavity pumps soltec foto 7

PROBLEM:
A large company that produces metals needed a pulp pump with mechanical impurities. According to the technical specifications, the pulp is fed to a filter press. Pump capacity 30 m3 and pressure 18 bar.

SOLUTION:
To accomplish this task, SOLTEC® specialists selected and manufactured a horizontal single screw pump BN090S03FZ. To ensure stable operation on media with abrasive content, a stuffing box seal is used.

Technical details of screw pump BN090S03FZ:
  • Pump Type - Horizontal Single Screw
  • Material of a flowing part - Steel 12X18H10T
  • Rotor Material - Steel 12X18H10T
  • Stator material (ferrule) - IRP-1294
  • Productivity - 30 m3/hour
  • Outlet pressure - up to 18 bar
  • Drive shaft speed - 232 rpm
  • Input / output: flange DN150
  • Engine power - 30 kW
  • Drive Shaft Seal Type - Service Packing
  • The pump is equipped with a VARMEC gearbox

Lead Project Manager
CONTACTS
  USA
BATURIN, INC
300 Spectrum Center Drive #400, Irvine, CA 92618
Headquarters
EUROPE
Lublin
BATURIN Poland
Official representative
Plauen
V.E.P. Baumaschinen GmbH
Official representative
Antwerp
TRACS BV
Official representative
ASIA
Nur-Sultan city
"SOLTEK NMZ", TOO
Official representative
MIDDLE EAST
Tirat Carmel
DWM TECHNICAL SERVICES LTD
Official representative
AFRICA
Cape Coast
Official representative
Chingola
Official representative
Lusaka
Official representative
Scottville
Official representative