PROGRESSIVE CAVITY PUMPS

The basis of any Progressive Cavity Single Screw Pump is a power section which usually consists of a metal rotor (n-start external helix) and a rubber stator (n+1-start internal helix). Rotation of the rotor inside the stator creates sealed cavities that progressively move from suction to discharge side of the pump producing differential pressure.

Home > Our Projects > Single screw progressing cavity pump SOLTEC ® BN045S04HY for lubricant conveying
Gallery

TASK: One of the leaders in the oil refining industry, requested for quotation for single-screw pump unit for dense greases. The main requirement for a screw pump has been creation of work pressure up to 24 bar. The nominal temperature of the pumped liquid is from 70° C to 120 °C.

SOLUTION: To solve this problem, SOLTEC ® specialists calculated and selected the BN045S04HY gerotor pump that able to provide stable working pressure under aforesaid conditions. The screw pump has a capacity of 5.7 m3 / h at a pressure of 24 bar. Electric motor has general industrial execution for climatic conditions U2.

The main characteristics of the BN045S04HY screw pump unit are following:

  • Pump type - horizontal single screw progressive cavity pump
  • The material of the flowing part - steel 20 with a protective coating
  • The maximum outlet pressure - 24 bar
  • Rated output - 5.7 m3 / h
  • Seal type of drive shaft - single mechanical seal
  • Electric engine power - 7.5 kW