Home > UNSERE PROJEKTE > SOLTEC ® BN038S08FZBSC screw pump for pumping explosives

progressive cavity pumps soltec foto 2 progressive cavity pumps soltec foto 1 progressive cavity pumps soltec foto 3 progressive cavity pumps soltec foto 4 progressive cavity pumps soltec foto 5 progressive cavity pumps soltec foto 6 progressive cavity pumps soltec foto 7 progressive cavity pumps soltec foto 8

PROBLEM:
A large manufacturer of explosives has a need for pumping matrix (explosives). The pump was supposed to give out 48 bar and be hydraulically driven. There were requirements: a CIP sink, an inlet neck, a screw feeder and a DN100 outlet on a chamber with a plug for servicing the hinge assembly without disassembling the pump. The pump will be in a place with high humidity, so the pump should be completely covered in stainless steel.

SOLUTION:
To solve this problem, our specialists developed the SOLTEC® BN038S08FZBSC pump unit.

TECHNICAL DETAILS OF THE SCREW PUMP BN038S08FZBSC:
  • Pump Type - Horizontal Single Screw Pump
  • Material of a flowing part - 12X18H10T
  • Estimated outlet pressure - 48 bar
  • Estimated capacity from 1 to 6 m3/h
  • Drive Shaft Seal Type - Gland
  • The hydraulic drive was selected and provided to us by the customer
  • Pump without bed for more compact installation on a tank truck

LEADING PROJECT MANAGER
CONTACTS
  USA
BATURIN, INC
300 Spectrum Center Drive #400, Irvine, CA 92618
Headquarters
EUROPE
Lublin
BATURIN Poland
Official representative
Plauen
V.E.P. Baumaschinen GmbH
Official representative
Antwerp
TRACS BV
Official representative
ASIA
Nur-Sultan city
"SOLTEK NMZ", TOO
Official representative
MIDDLE EAST
Tirat Carmel
DWM TECHNICAL SERVICES LTD
Official representative
AFRICA
Cape Coast
Official representative
Chingola
Official representative
Lusaka
Official representative
Scottville
Official representative