Home > UNSERE PROJEKTE > Single-screw pumping unit SOLTEC ® BN021S04FYTN for pumping plasticizers

progressive cavity pumps soltec foto 1 progressive cavity pumps soltec foto 2 progressive cavity pumps soltec foto 3 progressive cavity pumps soltec foto 4 progressive cavity pumps soltec foto 5 progressive cavity pumps soltec foto 6

TASK: Before the customer - one of the manufacturers of paints and varnishes, became the task of dispensing plasticizers.

SOLUTION: To solve this problem, SOLTEC ® specialists selected the SOLTEC ® BN021S04FYTN screw pumping unit.

Main characteristics of the screw pump BN021S04FYTN unit:

  • Pump type - horizontal single screw pump.
  • The material of the flow part is steel 12X18H10T.
  • Outlet pressure up to 24 bar.
  • Estimated capacity - 0.84 m3/h.
  • The type of drive shaft seal is a single mechanical seal.
  • Characteristics of the electric motor - 2.2 kW, 380 V, 1500 rev/min.
  • Varmec gearbox (Italy) provides the nominal speed of rotation of the pump screw 628 rpm.
  • Installed control system "dry run".
  • Additional engine cooling is provided (fan with independent power supply 220 V). This option allows you to cool the engine while controlling the performance of the pump unit with a frequency converter.
CONTACTS
  USA
BATURIN, INC
300 Spectrum Center Drive #400, Irvine, CA 92618
Headquarters
EUROPE
Lublin
BATURIN Poland
Official representative
Plauen
V.E.P. Baumaschinen GmbH
Official representative
Antwerp
TRACS BV
Official representative
ASIA
Nur-Sultan city
"SOLTEK NMZ", TOO
Official representative
MIDDLE EAST
Tirat Carmel
DWM TECHNICAL SERVICES LTD
Official representative
AFRICA
Cape Coast
Official representative
Chingola
Official representative
Lusaka
Official representative
Scottville
Official representative